High Flow Water Pump Cooler Impeller Spacer For Gas Gas SM / ES 700 2022-2024
Features:
- Oversized Impeller & Raised Base - Enlarged impeller vanes have been devised to force more fluid to discharge at the same engine speed for faster cooling. To accommodate the vanes, a spacer is included to be interposed between the engine block and the water pump cover. The raised base of the impeller also facilitates the momentum of the coolant, thus maximizing the flow rate and improving the heat exchange. The upgraded impeller profiles avoid unpleasant cavitation that would lead to a loss of efficiency.
- Aluminum Spacer - The aluminum spacer increases the heat-dissipation surface area, effectively preventing overheating and reducing the activation of your radiator. With the combination of the aluminum spacer and the upgraded impeller, the potential of your motorbike can be unleashed to the max.
- High-hardness Vanes - The stock impeller is made of flimsy plastic that's easy to get deformed under high temperature over time, which will rub the water pump cover. Our product is crafted from aircraft-grade billet aluminum, super sturdy and corrosion-resistant.
- Dynamic Look - Anodized surface for enhanced aesthetics and rust resistance. Ride your beloved bike with pride.
- CNC Technology - Using the latest generation of CNC technology, they are cut to ensure high accuracy for a perfect fit.
Test of Cooling Effect:
The temperature of the coolant has been reduced from 200℉ to 192℉ after installation in 50-min idling test. The data may vary depending on the specific environment of your region and riding intensity.
Item Specifications:
- Brand: NICECNC
- Condition: 100% Brand new
- Material: Billet aluminum
- Processing: CNC-machined
Package Included:
1X Water Pump Spacer
1X Water Pump Impeller
2X Gasket
(including all necessary mounting hardware)
Fitment:
- For Husqvarna
701 SVARTPILEN /VITPILEN/Enduro/Supermoto 2016-2023
- For KTM
690 DUKE/DUKE R/Enduro/Enduro R/SMC/SMC R 2008-2023
- For Gas Gas
700 SM/ES 2022-2024
Installation Instructions:
✅ 1. Clean the Contact Surfaces Before installing the gasket, thoroughly clean the water pump contact surface and the engine housing to ensure: • No oil, dust, or old sealant residue remains. • Use a clean cloth or scraper to remove any debris, and wipe the surface with a degreaser to ensure it is dry and residue-free.
🔹 Purpose: To prevent poor sealing and ensure proper adhesion of the sealant.
✅ 2. Evenly Apply PTV Engine Sealant • Evenly apply a thin, uniform layer of PTV engine sealant to both sides of the gasket. • Avoid applying excessive sealant, as this may: • Cause poor sealing • Lead to sealant overflow, making future disassembly difficult
🔹 Note: Use specification-compliant PTV sealant to ensure high-temperature resistance, leak prevention, and long-lasting sealing performance.
✅ 3. Proper Installation and Tightening • Accurately align the gasket with sealant applied between the water pump and the engine. • Tighten the bolts according to the manufacturer's recommended torque specifications to ensure even compression.
⚠️ Caution: • Avoid over-tightening, as it may: • Damage the gasket • Deform the contact surface, compromising the seal
✅ 4. Curing Time • After installation, allow the sealant to cure undisturbed. • Refer to the sealant’s instructions for curing time to ensure optimal sealing performance before starting the engine.
🔹 Tip: Avoid moving or disassembling the parts during the curing process.
✅ 5. Safety Tips • Wear protective gloves during installation to prevent sealant from contacting the skin. • Work in a well-ventilated area to avoid inhaling volatile gases. • When cleaning excess sealant, use a dedicated cleaner or alcohol to keep the contact surface clean.
Disclaimer:
Nicecnc parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Harley-Davidson，KTM, Duke，Aprilia，Triumph，Husqvarna, Honda, Yamaha, Kawasaki, Suzuki, Beta, GASGAS, Sherco, Polaris, Can-am, Arctic Cat, Ski-Doo，Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian,etc.
