Oversized Water Pump Impeller Cooler Kit For KTM 450 500 EXC-F/XCF-W Husqvarna 450 500 FE/FX 17-24 Gas Gas 450 MC F/ EX F/EC F 21-24
Features:
- Faster Cooling-Enlarge impeller vanes allow more coolant to pass through the water pump at the same engine speed. Lower the temperature of the coolant by 10-15 degrees than standard, optimizing the overall performance of your bike.
- Extended Space-The aluminum spacer Increases the overall volume of coolant passing through the water pump and improves heat exchange.
- Lightweight Aluminum-Made from premium 6061-T6 aluminum that provides superior hardness at the lowest possible weight.
- Race Look-Processed by cutting-edge anodic oxidation to maintain its original appearance over time and enhance the bike's character.
- CNC Technology-Boasts the latest CNC technology, the accuracy of each cutting part can be ensured for easy installation.
Item Specifications:
- Brand: NICECNC
- Condition: 100% Brand new
- Material: Billet Aluminum
- Processing: CNC-machined
- Surface: Anodization
Package Included:
1x Oversized Water Pump Impeller Cooler Kit
Fitment:
- FOR KTM
450 500 EXC-F/XCF-W 2017-2024
KTM 450 SMR 2021-2024
450 RALLY FACTORY 2019-2022
500 XW-F 2024
- FOR Husqvarna
450 501 FE/FE S/FX 2017-2024
FR 450 RALLY 2019-2024
FE 501w 2024
- FOR Gas Gas
RX 450F REPLICA 2023-2024
500 EW F/ES/EC F 2024
Installation Instructions:
✅ 1. Clean the Contact Surfaces Before installing the gasket, thoroughly clean the water pump contact surface and the engine housing to ensure: • No oil, dust, or old sealant residue remains. • Use a clean cloth or scraper to remove any debris, and wipe the surface with a degreaser to ensure it is dry and residue-free.
🔹 Purpose: To prevent poor sealing and ensure proper adhesion of the sealant.
✅ 2. Evenly Apply PTV Engine Sealant • Evenly apply a thin, uniform layer of PTV engine sealant to both sides of the gasket. • Avoid applying excessive sealant, as this may: • Cause poor sealing • Lead to sealant overflow, making future disassembly difficult
🔹 Note: Use specification-compliant PTV sealant to ensure high-temperature resistance, leak prevention, and long-lasting sealing performance.
✅ 3. Proper Installation and Tightening • Accurately align the gasket with sealant applied between the water pump and the engine. • Tighten the bolts according to the manufacturer's recommended torque specifications to ensure even compression.
⚠️ Caution: • Avoid over-tightening, as it may: • Damage the gasket • Deform the contact surface, compromising the seal.
✅ 4. Curing Time • After installation, allow the sealant to cure undisturbed. • Refer to the sealant’s instructions for curing time to ensure optimal sealing performance before starting the engine.
🔹 Tip: Avoid moving or disassembling the parts during the curing process.
✅ 5. Safety Tips • Wear protective gloves during installation to prevent sealant from contacting the skin. • Work in a well-ventilated area to avoid inhaling volatile gases. • When cleaning excess sealant, use a dedicated cleaner or alcohol to keep the contact surface clean.
Disclaimer:
